1. Do not use an open flame to bake the oil pan of the diesel generator. This will cause the engine oil in the oil pan to deteriorate or even burn, and the lubrication performance will be reduced or completely lost, which will aggravate the wear of the machine. In winter, a low-freezing point oil should be used.
2. In winter, light diesel with low freezing point and good ignition performance should be used. Because the low temperature in winter will reduce the fluidity of diesel, increase the viscosity, it is not easy to spray, it will cause poor atomization, can not fully burn, cause the power of diesel generator to drop, and cause waste. It is generally required that the freezing point of diesel should be 7-10℃ lower than the local low gas in the current season.
3. After the diesel generator set is turned off, the water temperature is below 60℃, and the water is not hot, then turn off the fire and let the water out. When the body is suddenly attacked by cold air at high degrees, it will shrink suddenly and cracks will appear. The water must be drained thoroughly.
4. The air filter cannot be removed for heating, causing wear of the piston, cylinder and other parts.
In winter, the temperature is low, and the generator set is overcooled during operation. Therefore, heat preservation is the key to good use of diesel generators in winter. In the northern regions, diesel generators used in winter should be equipped with thermal insulation sleeves and thermal curtains and other cold-proof equipment, often using an abnormal starting method without water (start first, then add cooling water). This practice can cause serious damage to the machine, and its use should be prohibited. Preheating method: first cover the heat preservation quilt on the water tank, open the drain valve, and continuously pour 60-70℃ clean and soft water into the water tank. When the water flowing out of the drain valve feels hot, then close the drain valve and fill the water tank. Put in clean soft water at 90-100℃, and shake the crankshaft so that all moving parts are properly pre-lubricated before starting.
LIG International Marine Group Co.Limited specializes in the production and sales of marine accessories. The main products are anchors, anchor chains, outfits, yacht accessories, wire ropes and container fasteners. Outfitting parts mainly include cable guides, cable guides (mooring posts), cable guide rollers, roller cable guides, roller cable guides, cable guide holes, brake knife chain arresters, anchor anchors, cable anchors , Marine steel door, steel marine hatch cover, steel marine ladder, manhole cover, we can provide certificates of major classification societies, CCS, ABS, BV, DNV, GL, LR, NK, KR and other product certifications .
Our products are sold to more than 50 countries and regions, including Europe, Middle East, Australia and Southeast Asia, and have won wide praise from domestic and overseas customers.
We provide marine accessories with excellent quality and very competitive prices. Hope to become your company's partner! If you are interested in our products or have any questions, please feel free to contact us by phone or email.